Composite Video and Studio Quality Stereo

Distribute stereo and composite video signals anywhere in the home or studio using category 5 cable and Knoll's UTP Transmission Systems. Send VCR, DVD, cable TV, satellite and security camera signals from a few feet to up to 1,000 feet (300 meters) of cable with no discernible audio or video distortion and better performance than the more expensive, specialized "designer" cables. The Knoll transmission system works better than conventional "balun" systems because the Knoll transmission system relies on active electronics rather than transformers that can saturate and are not as linear as active systems.

The stereo and composite video transmission system comprises: a Send Unit for transmitting audio and video signals and a Receive Unit for receiving signals. A six outlet wall or SMC mount Hub is also offered if whole house distribution is required. Two or more Hubs can easily be ganged together for more outlets.

Knoll UTP (Unshielded Twisted Pair wire) transmission systems utilize advanced active electronics to operate with different topologies:

1.  A stand alone send unit and receive unit system with a single power supply.
2.  A Hub (with or without a send unit) and up to six receive units.

The send and receive units are available in an in-wall Decora™ version or mounted in a black enclosure. UB and UTP series can be mixed or matched as desired. The Hub is available in a wall mount version or can be installed in selected structured wiring centers.

Send and receive units run on 12 VDC, and can be powered independently or through the Hub. Power for the send and receive units are supplied from a PS1202 power supply on one end only (only one supply is needed for both the send and receive). Hubs supply the power for itself and all send and receive units.

Specifications:

Models and Dimensions:
UB-Send (black enclosure): 1.1"h x 2.6"w x 2.8"d (28 x 66 x 71 mm).
UTP-Send (in-wall version): 4.1"h x 1.4" w x 2.0"d.
UB-Receive (black enclosure): 1.1"h x 2.6"w x 2.8"d (28 x 66 x 71 mm).
UTP-Receive (in-wall version): 4.1"h x 1.4"w x 2.0"d.
UTP-Hub: 6.5"h x 3.4" w. x 1.75"d.

Video Bandwidth:
Send Unit: 100 mHz @ -3. dB.
Receive Unit: 100 mHz @ -3. dB.
Module Hub: 100 mHz @ -3. dB

Video Input:
Receive unit: 0.5 V to 2V composite.
Hub: 0.5V to 2V composite.

Video Output:
Send unit: 0.5 V to 2 V composite.

Input and Outputs:
Send Unit:Three RCA input Jacks, one RJ-45 out-jack, one-110 punchdown out (UTP-Send only), one-DC power input.
Receive Unit: Three RCA output jacks, one RJ-45 in-jack, one-110 punchdown set (UTP-Receive only), one-DC power input.
Hub: Three RCA input jacks, one-RJ-45 input jack, six-RJ-45 output jacks, one-DC Power input.

Audio Input:
Receive Unit: 20k ohms, max 3 Vp-p.
Hub: 20k Ohms, max 3 Vp-p.
Frequency Response 10Hz-50kHz +/- 3 dB

Power:
Send Unit: 12 VDC unregulated (one PS1202 will power one each send and receive).
Receive Unit 12 VDC unregulated (one PS1202 will power one each send and receive).
Hub: 15 VDC (one PS1506 will power the Hub, six receives and one send).

Decora™ is a trademark of Leviton