Multi Baluns; Component Video, Digital Audio, Stereo Audio and Infrared Repeater

Distribute digital audio, stereo audio, infrared repeater and component video signals anywhere in the home using two category 5 cables and the Knoll's multi transmission system. Send DVD, cable TV, satellite and digital pictures and sound from a few feet to up to 500 feet (150 meters) of cable with no discernible video distortion or cable loss and better performance than the more expensive, specialized "designer" cables.

The Knoll's transmission system works better than conventional "balun" systems because the Knoll's transmission system relies on active electronics rather than transformers that can saturate and are not as linear as active systems.

The multi transmission system comprises:

1. Send Unit for transmitting the video and audio signals as well as receiving infrared signals

2. Receive Unit for receiving the video and audio signal and sending infrared signals.

Two catergory 5 wires are required for the multi balun system.

Send and receive units run on 12 VDC and are powered with one 12 VDC power supply on either the send or receive side. We suggest using our PS1205 power supply.

The send and receive units are available in an in-wall double Decora™ version in white, almond, ivory or black color. It is not available in a box version at this time. There is no hub available at this time.

The Knoll balun system uses very little power and is normally left on or it can be switched on and off with a switched outlet. A led lamp shows if power is connected properly on both the send and receive unit.

The Knoll balun system does not have any user adjustments and is completely automatic.

Specifications:

Works on Dolby Digital and DTS. Video works on 480p, 480i, 720p, 720i, 1080i up to 800' (240m) and 1080p up to 400' (120m)

Models and Dimensions
UDR-MULTI (in-wall Decora™ version): 4.1"h x 3.4" w x 2.0"d.
UDS-MULTI (in-wall Decora™ version): 4.1"h x 3.4"w x 2.0"d.

Video Bandwidth
Send Unit: 450 mHz @ -3 dB.
Receive Unit: 450 mHz @ -3 dB.

Video Input
Receive unit: 0.5 V to 2V.

Video Output
Send unit: 0.5 V to 2 V.

Digital Audio Bandwidth
Send Unit: 150 mHz @ -3 dB.
Receive Unit: 150 mHz @ -3 dB.

Digital Audio Input
Receive unit: 0.5 V to 2V.

Digital Audio Output
Send unit: 0.5 V to 2 V.

Stereo Audio Input Impedance:
Receive Unit: 20k ohms, max 3 Vp-p.

Input and Outputs:
Send Unit: three video RCA input jacks, one digital audio RCA input jack, two stereo input RCA jacks, one 3.5mm mono infared emitter jack; one RJ-45 out-jack, one-DC power input.
Receive Unit: three video RCA output jacks, one digital audio RCA output jack, two stereo output RCA jacks, one 3.5mm stereo infrared receiver jack, one RJ-45 input-jack, one-DC power input

Power:
Send Unit: 12 VDC unregulated 250 mA (one PS1205 will power one each multi send and receive).
Receive Unit 12 VDC unregulated 250 mA (one PS1205 will power one each multi send and receive).

Do not connect two power supplies to the Knoll Multi balun system.

Decora™ is a trademark of Leviton