Knoll Systems -SVC2x6

Six Room Volume Controller

Stereo interface with six 12 position volume controls.

Stackable full size cabinet.

Each room can individually select form two input amplifiers.

Powers up to six pairs of speakers with one or two amp(s) or receiver(s).

Simplifies multi-room stereo system and installation.

Architectural requirements are becoming more sophisticated with more speakers in more rooms. This places greater demands on existing components. The Knoll SVC2x6 provides a cost-effective solution to safely power two to six pairs of stereo speakers from a single stereo amplifier or receiver. Each room can select from two amplfier sources and each room can select its own preferred volume level including fully off. A mute switch is also provided.

Power handing is no problem as the SVC2x6 is rated for 150 watts per channel (24-hour rating). Installation is very quick and simple, even for first time users.

The cost-effective SVC2x6 features top sound quality, high-power capacity with slim line design to maintain complete musical integrity.

The Knoll WIN600 wall-mount transformer-free stereo interface is also available. The SVC2x6 is available in a transformer-free version without volume controls (SI1x6). Call your dealer for more details.

Specifications:

Peak RMS Power Rating	300 watts per channel (five seconds)
Continuous RMS Power	150 watts per channel
Frequency Response	20 to 20,000 Hz +/- 2 dB
Speaker Control	Two - six or more pairs of 4-16 ohm speakers
Speaker Impedance	4-16 ohms (single or multiple speakers)
Speaker Wiring Method	Series or Parallel wiring
Speaker Types	Most speaker types are acceptable. Similar and dissimilar speakers can be used on one interface and all room speakers will sound their best
Grounds	Independent grounds (l/r) for safe connection of all conventional amplifiers even ones with bridged or floating grounds are provided
Connection	Screw terminals capable of 12-20 AWG (4 mm) wire
Dimensions	17-1/4 x 6-1/2 x 1-3/4" (44 x 16-1/2 x 4-1/2 cm)
Weight	8-1/2 lbs (3.9 kg)
Color	Black

Wire Requirements:

Speaker wire for the SVC2x6 should be copper, minimum 16 gauge. Runs longer than 33' (10 m) should be minimum 14 gauge wire. Two wire pairs (left and right) are run from the stereo amplifier or receiver to the stereo interface. Two more wire pairs are run to each volume control (optional), then one wire pair continues to each speaker. When "pre-wiring", leave an extra 3' (1 m) at each end to allow easy component installation.